Find new and used Engine Assys near you!

This is a 3208N truck spec engine. This engine is from a FORD Truck application. THIS ENGINE HAS: NEW REAR CRANK SEAL, REMAN INJECTORS, VALVES ADJUSTED, OIL & FILTERS, RESURFACED FLYWHL, TEST RAN THIS IS A COMPLETE DROP IN UNIT COMPLETE W/ACCESSORIES This engine runs at 210HP, 2800RPM This engine has been reconditioned and is Drop-In Ready.

This CAT 3208T engine was reconditioned and fits a truck spec. ENGINE HAS BEEN DISASSEMBLED, CYL HEADS REBUILT, CYLINDER BORES HONED, PISTONS CHECKED AND RE RINGED, ROD BEARING CHECKED AND REPLACED, INJECTORS TESTED, NEW FRONT AND REAR CRANK SEALS INSTALLED, GASKETS REPLACED AS REQUIRD, ENGINE DETAILED. This 3208T runs at 250HP and 2600rpm This 3208T engine is drop-In Ready. This engine comes with a 60 DAY Major Castings Warranty.

This Reconditioned 6V53N Detroit Diesel has be qualified by our Professional Service team. Work performed: -Removed Valve Cover to Perform Valve, Injector & Rack Adjustments -Reconditioned the blower on motor. -Detailed, Installed & Tested operation - Good -Flushed Cooling System with Coolant -Adjusted Valves, Injectors & Rack -Removed Valve Covers -Cleaned & Detailed Valve Covers -Removed Exhaust Manifolds & Cleaned -Resurfaced Manifolds & Detailed -Cleaned Mounting Surface for Manifolds -Replaced Hose between Block & Oil Cooler -Installed Valve Covers -Installed Breather Hose -Removed Air Box Drain Tubes & cleaned -Cleaned Oil from Air Box -Reinstalled Drain Tubes & Fittings -Replaced Hose from Thermostat Housing to Water Pump

This DYNO'd LOW Hour Industrial CAT C15 Engine was purchased in an oil field package. This Engine has 3300 original hours on the engine. This engine received a basic engine inframe & New Cylinder head to provide a basic warranty behind this engine. This engine has been built to its original spec, and has been Dyno-tested w/ paperwork of the results. -NOTE: Ran Excellent! This Engine is sold with a 6 months Major Castings warranty.

This Good take out INDUSTRIAL C9 engine has been inspected, and resealed. This C9S spec'd engine has had the bearings inspected, new rear seal and a top end valve set complete. This engine has been test ran, and painted.

This complete 8v92T engine has been fully reconditioned by our Professional service team. This engine has had a new Front & Rear seal installed, bottom end inspected, and top end valve set completed. This engine has been Test Ran- Excellent!!!! This True 8v92T Silver is ready for service.